If you are the owner of the Samsung Galaxy M01 SM-M015F/G smartphone and you also want to customize this smartphone, then you have come to the right place. If you are an Android enthusiast and want to do TWRP recovery on your beloved device, then you have come to the right place. We will soon explain the TWRP installation process and rooting of the Samsung Galaxy M01 SM-M015F/G.
The Samsung Galaxy M01 is equipped with the Qualcomm SDM439 Snapdragon 439 (12nm) chipset, an Octa-core processor (4×1.95GHz Cortex-A53 and 4×1.45GHz Cortex A53), an Adreno 505 GPU, a 5.7-inch screen, an area of 81.6 cm2 (~78.))1 screen-to-phone ratio), PLS IPS, 720 x 1520 pixels, 19:9 aspect ratio (density ~294 pixels per inch), 32GB internal memory/RAM 3GB, 13MP dual sensor main camera, f/2.2, 28mm (width), 1/3.1″, 1.12µm, AF/ 2MP, f/2.4, (depth), 5MP car camera, f/2.2, 1/5″, 1.12µm, 4000mAh Li-Ion battery, non-removable.
The TWRP is characterized by its material design and attractive user interface (UI). Following this guide will help you install the latest version of the TWRP for the Samsung Galaxy M01 SM-M015F/G. You can download TWRP Recovery from the links in the required section of this article. Please note that this is an official TWRP recovery and only for the Samsung Galaxy M01 SM-M015F/G (Confirm the model by going to Settings > Startup). The process described below is only for rooting and installing the TWRP on the Samsung Galaxy M01 SM-M015F/G, do not test this method on other devices.
If you want to harness the full potential of your Samsung Galaxy M01 SM-M015F/G hardware, the most important task is to turn and flash the TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a root device and a flashy TWRP recovery, you can install any custom ROMs, modules, kernels, Xposed, etc, as well as many applications that require root access to function properly.
Make sure the root of Xiaomi Redmi Go (Tiara) and install TWRP Restore
Brief information and benefits of TWRP repair
The TWRP (Team Win Recovery Project) is an open source community development project. With the flashing TWRP, your device can install any firmware, boot your smartphone, modify zip files for settings, Xposed modules for settings, root and unroot processes in one click. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. The TWRP allows you to easily erase, cache and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.
To install the TWRP, your Samsung Galaxy M01 SM-M015F/G phone must have an unlocked Bootloader. This means that you must first unlock the bootloader to install the root of the device, as well as to perform any configuration.
Disclaimer : While AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is still a modest chance that the steps listed here will cause major problems. It is therefore in the interest of the user to follow the instructions very carefully to avoid any incident with the device.
Activating and deactivating custom ROM firmware will definitely void your device’s warranty, and AndroidWeblog.com cannot be held responsible for invalid warranties or damaged devices.
Condition
Check the model number, which should be listed:
- Samsung Galaxy M01 [Models : SM-M015G, SM-M015F, SM-M015G/DS, SM-M015F/DS].
You should make sure you read the disclaimer carefully before using your phone regularly and agree to continue taking this risk.
The phone must be charged to 70%, otherwise complications may arise during the experiment. Why take the risk of trying to fully charge it.
If you are going to install a root of your phone or a custom ROM, it is a good practice to backup your phone. Back up all your media like photos, videos and everything else on your PC and your contacts to the cloud.
You need to enable the USB debugging option by going to Settings, Applications and Developers.
Root Downloads Samsung Galaxy M01 SM-M015F/G Android 10 One UI 2.0
Download Samsung drivers here (if you already have drivers installed on your PC, ignore this).
Download Odin from here.
ALWAYS REMEMBER how to run the Samsung M40 SM-M405F galaxy and install TWRP recovery
Download the TWRP recovery for the Samsung Galaxy M01 SM-M015F/G here:
TWRP Recovery 3.4.0
The link will be updated soon
Download SuperSU via Chainfire from here.
Unlocking the Samsung Galaxy M01 SM-M015F/GB Android 10 One UI 2.0
Step one: Make sure USB debug mode and OEM unlock are already enabled on your smartphone. Just go to Settings > About > then type in the build number 7-10 times in a row to enable USB debug mode and activate OEM unlock. So clearly, the process is not complicated.
Step two: Then simply turn off your Samsung Galaxy M01 SM-M015F/G. Now it’s time to switch to boot mode. To enter boot mode, press the Volume + and Volume – buttons simultaneously and connect your smartphone with a USB data cable. When the device enters boot mode and the boot screen is displayed, simply press the volume up button and the Samsung Galaxy M01 SM-M015F/G boot loader will be unlocked.
Attention: Unlocking the bootloader will erase the user data on your device. After configuring your device, check the OEM unlock settings, in previous cases the device will be locked again.
Steps to flash/install TWRP 3.4.0 on Samsung Galaxy M01 SM-M015F/G Android 10 one UI 2.0
Step one: Suppose you have already downloaded the latest Odin and TWRP recovery for your device from the preview area above. If the latest version of Odin does not work on your device or if you are having problems, just download the correct version of Odin.
Step two: Make sure you have already downloaded TWRP Recovery for your Samsung device. Then just unpack the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.
Step three: Once the device is turned off, simultaneously press the Power+Volume down+Home keys and the device will enter the boot mode. If this key combination doesn’t work for your device, you can just Google it.
Step four. Now connect your Samsung device to your computer using a USB cable. Next, navigate to the folder where the Odin files were extracted and right-click on the Odin executable and then click Run as Administrator.
Step Five: The interface should display something like ID:COM below, and check the interface below carefully.
Step six: Note the ID:COM and the empty field below, which turns blue when the device is detected. The device should be detected if the correct drivers are installed on the computer.
Step seven: Then just click on AP, go to the firmware archive, find the .tar.md5 file and select it after clicking on AP.
READ ALSO how to install Samsung Galaxy A51 SM-A515 root and TWRP recovery
Pay attention: There is a PIT zone in the area. Do not place a file in the PIT section and make sure that redistribution is not enabled. Check the box and place a check next to Auto-Restart and F. Reset Time.
Step 8 : Once the TWRP file (.img) is uploaded to the AP field, the flashing or installation process can begin. Be careful not to touch the USB cable while it is flashing.
Step 9 : If all goes well, at the end you will see a green PASS or RESET message indicating that the TWRP firmware process for your device has been successfully completed and that it now has a TWRP recovery function. At this point the device will automatically reboot, don’t panic, it’s normal. You can now disconnect the device from the computer.
Procedureto install the Samsung Galaxy M01 SM-M015F/G to run on Android 10 a UI 2.0/ Magisk or SuperSU.
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then go through the steps.
Pay attention: You can use Magisk Manager or Super SU, but only one, so choose well. If you’re not sure, go to Magisk Manager.
Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy M01 SM-M015F/G.
Step two: Now all we have to do is initiate the recovery. You can also back up the ROM through the TWRP interface. However, I recommend making a backup copy of the ROM. Because if the process fails, you can flash the ROM.
Step three: Press Install and then navigate to SuperSU.zip or magisk.zip and drag the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you have now installed the Samsung Galaxy M01 SM-M015F/G and the TWRP. You can now install Xposed Framework and customize your smartphone to your liking. If you want to check this, you can download and check the status of the root through the Root Checker application.
Related Tags:
twrp
Leave a Reply